For those who demand the best Ask Averto
|Colour:||white gray & white green & white|
|Size||4 x 4 m|
|Floor area||16 m2|
|Material||PVC 380 g/m2 & 500 g/m2|
1 x 65 x 55 x 12 cm = 8 kg
1 x 207 x 26 x 11 cm = 27 kg
1 x 65 x 55 x 18 cm = 32 kg
Our tent 4x4 m features 16 m² of covered space and can accommodate up to 64 people standing or 24 people seated. 4x4 m tent will protect you from sun and rain during outdoor events.
Averto PVC Tents for parties & events are made of PVC material - 500g/m2 for the roof area and 380g/m2 forthe side walls. The welded seams make the entire tent absolutely waterproof.
The sidewalls have large windows (number of windows depends on the size of the tent) ensuring excellent exposure to light even in nasty weather. The side walls with windows are made up from separate 2 m wide parts. It is possible to remove or add the parts where you need them if necessary. The endwalls have different-sized entrances that can be opened and closed with robust zippers.
The PVC roof consists of one piece and can be excellently placed on the roof rods. Once in place, the roof is smooth and tautly stretched. The steel rod construction of the roof ensures the outstanding stability and statics of this party tent. The roof slant, specially dimensioned for this party tent, lets water drain easily and prevents the formation of water puddles.
The roof tarpaulin as well as all side parts are connected with the rods via bungees threaded through the stable eyelets. The delivery includes a sufficient number of bungees.
The tent feet have holes so they can be bolt down in case of solid ground like tar or concrete floors. You can even use dowels (screws and dowels are available in the retail trade).
The framework is comprised of very sturdy steel pipes in diameter of 38 mm to 42 mm. It is treated with an anticorrosive paint and painted white using powder coating technology.
Powder coating is a type of coating that is applied as a free-flowing, dry powder. The main difference between a conventional liquid paint and a powder coating is that the powder coating does not require a solvent to keep the binder and filler parts in a liquid suspension form. The coating is typically applied electrostatically and is then cured under heat to allow it to flow and form a "skin". It is usually used to create a hard finish that is tougher than conventional paint.
Due to their design and construction you can put together all the tents without special tools in less than an hour. The detailed set-up instructions as well as the labelling with stickers on each rod enable even beginners to set up this tent effortlessly.
Why Rent When You Can Buy For The Same Price? Our tents hold what they promise.
Product descriptions provide basic information, but sometimes you may have an unusual question about the product, its delivery or payment system. By using our contact form, you can ask questions or express your wishes. Get in touch with us and a detailed response will be sent to your e-mail address!