3x8 m SIMPLE 6mm

The greenhouse has welded end-walls and bows. “SIMPLE” greenhouses have 1 m distance between the bows. The size of the greenhouse is determined by the width of the polycarbonate sheet. Thus the greenhouse can be of any length that can be divided by 2m.

Bows, end-walls, doors, vents and stringers are made of welded profile (square shaped) pipe of 20x20 mm with 0.8 mm thick walls. The pipes are galvanized from both sides, thus preventing corrosion.

The "SIMPLE" greenhouse has a welded frame, which allows the greenhouse to withstand loads of up to 80 kg/m² (corresponds to 30 cm layer of fresh snow). Besides, the lateral planks (connecting bows) are fastened by use of a bolt and nut. It means that the greenhouse can withstand our snowy winters easily if it is covered by polycarbonate.

Standard delivery set includes 2 doors and 2 vents. Additional vents are sold separately.

All drill-holes for assembly and attachment of the polycarbonate are factory pre-made. This significantly improves the assembly.

All of the above described characteristics create a monolith construction, which ensures that the greenhouse will serve you safely for a long time, and also, if necessary, the greenhouse can be extended.

It is possible to install a greenhouse on the ground or a foundation (foundation is not mandatory for installation). If the greenhouse is installed on a foundation, it is necessary to purchase an additional fastening.

Greenhouse “SIMPLE” delivery set includes all bolts, screws.

Product descriptions provide basic information, but sometimes you may have an unusual question about the product, its delivery or payment system. By using our contact form, you can ask questions or express your wishes. Get in touch with us and a detailed response will be sent to your e-mail address!