Itella Smartpost 0.00 €
Venipak Pickup 0.00 €
Special Delivery Service Ask Averto
|Material||Galvanized Steel ∎ 20x20 mm|
|Packaging||1 x 60 x 3 x 3 cm = 1 kg|
If you are wondering about a safe way to fasten your greenhouse to the ground we can offer greenhouse anchors. Anchors are especially needed when installing greenhouses in windy regions.
Anchors in the form of an inverted "T" are a simple and safe appliance for installing a greenhouse directly into the ground.
The mounting of the anchor is done after the greenhouse has been assembled. A recess is dug at the place where the anchor will be located. Then it is attached to the frame of the greenhouse and installed in the recess dug.
Thanks to the fact that the anchors are galvanized they do not rust in the ground over time, and your greenhouse will last reliably for a long time.
A 3x4 m greenhouse needs at least 6 pcs, a 3x6 m greenhouse needs 8 pcs, and so two anchors are added to each extension.
If you have, for instance, a 6 m long greenhouse, then the minimum amount for your greenhouse is 8 pcs, i.e. 4 at the corners of the greenhouse and an anchor for every arc. Additionally, they can be installed at the ends.
As a result, we have a greenhouse sturdily fastened to the ground, safe from any winds.
Product descriptions provide basic information, but sometimes you may have an unusual question about the product, its delivery or payment system. By using our contact form, you can ask questions or express your wishes. Get in touch with us and a detailed response will be sent to your e-mail address!