3x10 m CLASSICO 4mm NANO

The Classico NANO 3x10 m polycarbonate greenhouse for a sooner harvest (up to 3-4 weeks) and less condensation.

The price of the CLASSICO NANO 3x10 m greenhouse includes the frame and the 4 mm polycarbonate NANO

When the air temperature in the greenhouse reaches 25 °C, the room should be ventilated. The optimum size of the windows should be at least 15% of the base area of the building, they should be located near the ridge of the roof, but large ventilation windows on both sides of the building are also acceptable. The basic kit of the CLASSICO NANO 3x10 m greenhouse already includes 2 doors with ventilation windows at opposite ends of the greenhouse. But to ensure enough ventilation for a 24 m2 greenhouse we recommend purchasing additional windows for ventilation as well and installing them on the ridge of the greenhouse.

Greenhouse length: 10.00 m

Greenhouse width: 3.00 m

Greenhouse height: 2.10 m

Area covered by greenhouse: 30 m²

Greenhouse frame is made from 0,8 mm thick galvanized steel. 

Frame parts are fixed by screws.

Basic setup includes 2 doors with ventilation windows located on opposite sides of the greenhouse. 

Foundation is not necessary for the greenhouse, since T-shaped endings must be dug into ground up to the base frame arch. However, the greenhouse is designed to be installed on light beams, planks or metal angles.

The greenhouse is sold in a dismantled state is easy to transport in a trunk of a car.

An additional section is available for the 3x4m greenhouse, which lengthens the greenhouse by 2 meters.

To cover a 3x4m greenhouse 3 polycarbonate sheets are required. Polycarbonate sheets can be rolled into a roll with length of 2.10 m and Ø 1.20 – 1.40 m.

Product descriptions provide basic information, but sometimes you may have an unusual question about the product, its delivery or payment system. By using our contact form, you can ask questions or express your wishes. Get in touch with us and a detailed response will be sent to your e-mail address!