Special Delivery Service Ask Averto
|Colour:||salmon color | translucent|
|Size||3 x 4 m|
|Floor area||12 m2|
|Polycarbonate||6 mm NANO|
|Carcass||Galvanized Steel ∎ 20x20 mm|
|Frame protection against rust||galvanization|
|Arc distance||67 cm|
|Snow load||100 kg/m2|
1 x 212 x 103 x 14 cm = 25 kg
1 x 210 x 46 x 8 cm = 30 kg
1 x 210 x 95 x 95 cm = 45 kg
Polycarbonate sheets are interconnected by partition walls. During greenhouse installation, the greenhouse sheet ends must be covered with polycarbonate UP profile or a special duct-tape suitable for outdoors to prevent humidity from entering between the polycarbonate cells, which is a beneficial environment for algae. At first, the polycarbonate will turn greenish, but with time it will become black. A correct installation direction must be observed - polycarbonate cell walls must be going from top to bottom, not horizontally. The outside and inside surfaces of the polycarbonate sheets must be observed and installed correctly.
If the greenhouse is installed next to a tree, the roof of the greenhouse will become covered in moss. Therefore, the greenhouse must be washed from time to time. However, to avoid scratching polycarbonate, use a very soft cloth and non-chemical solutions.
Also, avoid scratching surface in winter, when cleaning snow from the greenhouse. Avoid cleaning snow with a shovel or a sharp brush.
Product descriptions provide basic information, but sometimes you may have an unusual question about the product, its delivery or payment system. By using our contact form, you can ask questions or express your wishes. Get in touch with us and a detailed response will be sent to your e-mail address!