For those who demand the best Ask Averto
|Colour:||salmon color | translucent|
|Size||2.5 x 8 m|
|Floor area||20 m2|
|Carcass||Galvanized Steel ∎ 25x25 mm|
|Polycarbonate||4 mm NANO|
|Snow load||50 kg/m2|
2 x 211 x 31 x 07 cm = 19 kg
1 x 204 x 14 x 06 cm = 22 kg
1 x 207 x 39 x 09 cm = 51 kg
1 x 210 x 80 x 80 cm = 53 kg
A revolutionary feat in the agricultural sector – the Standart NANO 2,5x8 m polycarbonate greenhouse for a faster and richer harvest.
A revolutionary feat in the agricultural sector – the Standart NANO 2,5x8 m polycarbonate greenhouse for a faster (3-4 weeks) and richer (30-48%) harvest. Thanks to the nanostructured joints the Standart NANO greenhouses have an unusually soft pink tint.
The frame is made of a 1 mm thick closed galvanized steel pipe 25x 25mm, and the additional fastenings are made of 0.9 mm thick П-shaped profile 25x30mm. Use of this profile type allows to significantly increase the strength of the greenhouse construction.
Benefits: sturdy and durable frame can withstand blasts of wind, snow loads and other weather phenomena.
The greenhouse STANDARD NANO 2,5x8 m is covered with polycarbonate. An 8 meters long greenhouse will require 5 polycarbonate sheets 2100x6000. There is no need for foundation.
The distance between arcs - 1 meter.
The base set of the greenhouse STANDARD NANO 2,5x8 m is equipped with two vents on the opposite ends of the greenhouse. Take into account that the basic greenhouse delivery set includes a fastening designed for 4mm thick polycarbonate. If you plan to purchase a thicker polycarbonate, do not forget to purchase an appropriate fastening.
T-shaped greenhouse ends are buried in the ground to the arc, and thus there is no need for foundation. The frame can also be installed on light timbers, planks and metal bars.
For the convenience of transportation, the sheets can be rolled in a 2.10 meters long bolt with 1.20-1.40 meters in diameter.
You do not need any special skills to assemble the greenhouse. The whole construction can be easily assembled by 2 people with a screwdriver and a knife. The four meters long greenhouse consists of a two-meter frame and two-meter extension. Six meters long greenhouse consists of a base set and two 2 meter extensions. And so on.
When installing the greenhouse on the ground, it is buried up to the threshold and lower part fastenings. This method guarantees that the greenhouse will be fixed and remain stationary during strong and prolonged winds.
The polycarbonate is attached to frame in a way that differs from attachment to tunnel-shaped greenhouses. In this case bolts, screws and galvanized pressure strainers are used.
Take into account that the basic greenhouse delivery set includes a fastening designed for 4mm thick polycarbonate. If you plan to purchase a thicker polycarbonate, do not forget to purchase an appropriate fastening.
We also offer side vents for additional adjustment of air temperature and humidity level inside the greenhouse. Not included in the delivery set, to be purchased separately.
Product descriptions provide basic information, but sometimes you may have an unusual question about the product, its delivery or payment system. By using our contact form, you can ask questions or express your wishes. Get in touch with us and a detailed response will be sent to your e-mail address!